| 1 | Trackbox 2.0 | Powder-coated steel top box with lid compartment, top tray, three lockable drawers, 35mm ball-bearing slides and EVA foam inserts |
| 8 | Screwdrivers | Slotted SL5 x 75mm, SL6 x 100mm, SL8 x 150mm; Phillips PH1 x 75mm, PH2 x 100mm, PH3 x 150mm; Torx T15 x 100mm, T20 x 100mm |
| 1 | Tape measure | 3m x 19mm, auto lock, rubber casing, lanyard loop and belt hook |
| 1 | Mechanical vernier | Stainless steel, 150mm range, 0.05mm resolution |
| 1 | Pencil-type tyre pressure gauge | Metal-bodied |
| 1 | Torch | 75 lumens, requires 3 x AAA batteries (not included) |
| 1 | Wire brush | Brass wire strands, wooden handle |
| 1 | Schrader valve key | Plastic handle, steel shaft |
| 1 | Utility knife with 10 blades | 9mm steel-bodied knife, SK5 steel blades |
| 1 | Telescopic magnetic pickup | 4.5kg capacity, pocket clip, 160-620mm extension |
| 6 | Sliding T-bars | 8mm, 10mm, 12mm, 13mm, 14mm, 17mm |
| 2 | 1/2-inch drive spark plug sockets | 16mm and 21mm, 6-point |
| 9 | 1/2-inch drive sockets | 13mm, 14mm, 17mm, 19mm, 21mm, 22mm, 27mm, 30mm, 32mm, 12-point |
| 3 | 3/8-inch drive sockets | 8mm, 10mm, 12mm |
| 2 | Drive adaptors | 3/8-inch x 1/2-inch female; 1/4-inch male x 3/8-inch female |
| 7 | 1/4-inch drive sockets | 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12-point |
| 10 | 1/4-inch drive bit sockets | Torx T20, T45; slotted SL4, SL6; hex H4, H8; Phillips PH1, PH2; Pozi PZ1, PZ2 |
| 3 | Extension bars | 1/4-inch x 100mm, 3/8-inch x 150mm, 1/2-inch x 127mm |
| 15 | Combination spanners | 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24mm |
| 2 | Circlip pliers | 178mm internal and 178mm external |
| 1 | Locking plier | 250mm curved jaw, release lever, adjusting screw |
| 1 | Chain breaker | Alloy steel, chain sizes 25-60 |
| 2 | Tyre levers | 400mm chrome vanadium steel |
| 1 | Cable luber | Anodised aluminium body, dual-screw sealing |
| 1 | Spring tool | |
| 1 | Spoke wrench kit | Interchangeable tips for 5.0, 5.2, 5.4, 5.6, 5.8, 6.0, 6.2, 6.4, 6.6 and 6.8mm spoke nipples |
| 9 | Ball-point hex keys | 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm, with key holder |
| 2 | Reversible ratchets | 1/4-inch x 150mm and 1/2-inch x 245mm, rocker switches and socket-release buttons |
| 1 | Water-pump box-joint plier | 250mm, hardened edges, rubber grip |
| 1 | 3/8-inch mechanical torque wrench | 10-60Nm, aluminium knurled handle |
| 1 | Machinist hammer | 300g, PP-coated fibreglass handle |
| 1 | Mallet hammer | Interchangeable nylon and epoxy resin heads, wooden handle |
| 3 | Pliers | 150mm long-nose, 150mm diagonal, 175mm combination |
| 1 | Half-round steel file | 200mm, second cut |
| 1 | Foam storage cut-out | 80 x 80mm accessory space |
